As you are working with an airbag first disconnect the battery and wait 20 minutes

⚠️⚠️ if you skip this stage you risk the car throwing up and ABS warning light aswell as an airbag light that cannot be removed with a t4 and of course you risk the airbag blowing up in your face!⚠️⚠️ 

All you need for this is a T30 torx screw driver, most racket heads won't fit in the small gap

And a 16 mil socket

First locate the two small t30s on both sides of the steering wheel loosen these bolts till the airbag comes free

You will see a yellow and blue connector, press on it and it'll free itself, then disconnect the wiring that goes to the horns and cruise if you have it

Then you can begin removing the 16 mil socket holding the wheel on, make sure to not move the steering wheel during this stage 

Once that 16 mil is out, the new wheel is ready to go in, and then its simple...